Cleaning And Maintenance - Hoggar TONSBERG Mode D'emploi

CLEANING AND MAINTENANCE:

It is recommended for its correct conservation to keep the product clean, its cleaning can be
done with a soft damp cloth.
Never use abrasive solutions or detergents on the product.
It is important to always keep the shed drains clean so that dirt does not accumulate on the roof.
WARRANTY
This shed is made with the highest quality materials and under strict quality controls and standards.
In the event of any inconvenience in the purchased product, please contact customer service by
phone and email, which are described on the back cover of this instruction manual.
The guarantee is valid from the date of purchase that appears on the ticket or invoice, which must
be presented to use the guarantee.
The warranty period for this product is 10 years against any inconvenience or failure resulting from
a structural defect or discoloration.
THE WARRANTY IS EXCLUDED:
› Nonconformity with transportation. It must be communicated to the transport agency within
the period indicated on the delivery note once the product is received.
› Breakage, damage caused by inclement weather such as strong winds, hail, floods etc ...
› The bad assembly, incorrect use and consequences derived from it.
› Non-maintenance and wear parts such as shock absorbers, cylinder, handle and hinges
› The plastic pieces.
› Cleaning or maintenance with abrasive products.
› Damage due to corrosion in parts or sheets in intermittent areas, indirectly damaged areas
or due to being exposed to marine areas with salinity causing corrosion. Damage due to
corrosion on parts edges or corners is excluded from the guarantee.
› Discoloration caused by the passage of time.
› Scratches in the paint.
› Knocks or dents in the sheet metal.
› Failure to present the invoice or sales ticket and failure to notify in due time and form.
› The costs generated by the treatment of defective or damaged parts, as well as the
responsibility for indirect damages that may occur.
› Commercial use or for a purpose other than personal or domestic.
› Modifications, paintings or assembly not carried out in accordance with the law of guarantees
and explanations of the instruction manual, as well as the damages caused by exceeding the
storage capacity of the product.
EN
07