Table des Matières
Publicité
EN
USER'S GUIDE
Dearest customer:
Thank you for choosing
one of our products
BEFORE YOU START YOU SHOULD KNOW...
Two people
are required to
assemble this
shed
We advise you to carefully follow this instruction manual step by step for a correct assembly of the
product.
Make sure you have all the necessary parts for assembly and remove the protective plastic before
starting to assemble.
Do not assemble the shed near children or pets.
Plan to install the product on a dry, windless day. Avoid assembly on adverse weather days to avoid
product damage or personal injury. The shed is not designed to be built directly on the lawn.
Mounting on a level, firm base of wood, a flat cement floor, or cemented brick or block is
recommended. It is very important to fix the shed to the ground. It does not include screws or other
necessary parts for its anchorage.
If a cement base is made, it is important to lean towards the edges to prevent water ingress
The product should be located in a place sheltered from the wind and with good drainage. Avoid
placing it very close to areas with trees, since it will be necessary to regularly clean branches and
leaves that may fall.
We recommend removing snow from the metal shed after each snowfall.
You should never focus your body weight on the ceiling.
It is recommended for its correct conservation to keep the house clean with a soft cloth and to keep
the door track clean for its correct sliding.
The sheds are only intended to store objects, residence or other effects are prohibited.
TOOLS NEEDED FOR ASSEMBLY:
06
Assembly
can take 5-7
hours
Contact the
authorities to
determine if the
installation is
authorized
Publicité
Table des Matières
