Statistics Application Settings - Sartorius YDP20-0CE Installation Et Mode D'emploi

28

Statistics Application Settings

All settings are loaded in the printer's memory
(EEPROM) when the printer is switched on and applied
during operation.
There are two ways to open the menu for configuring
statistics application settings:
– Hold down the U key when you switch on the print-
er, or, during operation,
– Press and hold the key U for at least 5 seconds
The T, I, U and Y keys then have the
navigation functions indicated by the arrows.
Menu navigation is analogous to navigation in the
printer port configuration menu. All parameter options
in the statistics application menu are listed on the next
page.
To print the current settings, press the P key
The "C" or "L" printed after the program version num-
ber indicates whether menu settings can be changed:
C: "Change" Settings can be changed
L "Locked" The menu is locked; settings cannot
be changed