Auto Changeover - Honeywell FocusPro TH6320R Mode D'emploi

Operating Manual

Auto Changeover

Set Fan
Clock/Day Auto
Schedule
Press until screen
displays "Auto"
Note: The Auto system setting
may not appear, depending on
how your thermostat was installed.
69-2093EFS—07
System More
Auto
M28462
Auto Changeover is a feature used in climates
where both air conditioning and heating are
often used on the same day. When the system is
set to Auto, the thermostat automatically selects
heating or cooling depending on the indoor tem-
perature.
Heat and cool settings must be at least 3
degrees apart. The thermostat will automatically
adjust settings to maintain this 3-degree separa-
tion.
12