Auto-Changeover (Heat/Cool) - Honeywell FocusPRO TH6320R Mode D'emploi

Auto Changeover (heat/cool)
Set Fan
Auto
Clock/Day
Schedule
Press until screen
displays "Auto"
Note: The Auto system setting
may not appear, depending on
how your thermostat was
installed.
System More
Auto
Auto Changeover is a feature used in
climates where both air conditioning and
heating are often used on the same day.
When the system is set to Auto, the ther-
mostat automatically selects heating or
cooling depending on the indoor
temperature.
Heat and cool settings must be at least 3
degrees apart. The thermostat will auto-
matically adjust settings to maintain this
3-degree separation.
12