About Your New Thermostat - Honeywell FocusPRO TH6320R Mode D'emploi

About your new thermostat

Your new thermostat is pre-programmed and ready to go. All you have to
do is set the time and day. Then check the settings below and change if
needed:
1 Set time and day (required for proper operation) ...............See page 5
2 Select fan setting (Auto/On)....................................................See page 6
3 Select system setting (Heat/Cool) .........................................See page 7
4 Program schedules: Preset to energy-saving levels
while you're at work or asleep (assumes you
wake at 6 am, leave at 8 am, return at 6 pm
and go to bed at 10 pm).........................................................See pages 8-9
ONE-TOUCH TEMP CONTROL: You can override the program schedule at any time,
and manually adjust the temperature (see pages 10-11).
2