About Your New Thermostat; Set Time And Day; Program Schedules - Honeywell FocusPro TH6320R Mode D'emploi

Operating Manual

About your new thermostat

Your new thermostat is pre-programmed and ready to go. All you have to do is set
the time and day. Then check the settings below and change if needed:
1. Set time and day (required for proper operation) ...................See page 5
2. Select fan setting (Auto/On)......................................................See page 6
3. Select system setting (Heat/Cool) ............................................See page 7
4. Program schedules: Preset to energy-saving levels
while you're at work or asleep (assumes you
wake at 6 am, leave at 8 am, return at 6 pm
and go to bed at 10 pm) .........................................................See pages 8-9
CAUTION: EQUIPMENT DAMAGE HAZARD. You can override the program schedule at any
time, and manually adjust the temperature (see pages 10-11).
69-2093EFS—07 2