Preparing The Espresso Machine For Use; Attaching The Cup Rail; Removing And Washing The Water Tank - KitchenAid 5KES2102 Manuel D'utilisation

Masquer les pouces Voir aussi pour 5KES2102:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 37
PARTS AND FEATURES
Espresso (
) Boiler Temperature Gauge
Dial gauge indicates when espresso boiler has reached
optimum brewing temperature.
Frothing (
) Boiler Temperature Gauge
Dial gauge indicates when frothing boiler has reached optimum
steaming temperature.
Filter Holder
Commercial-size filter holder features chrome-plated brass
construction and an easy-to-grip flared handle. Attaches to the
brew head with a firm twist to the right.
Filter Baskets
Stainless steel filter baskets snap into filter holder. Use the
small-capacity basket for a single cup (30 ml) of espresso,
and the large-capacity basket for two cups (60 ml). The
small basket also accommodates paper coffee pods.
Frothing Jug
The 255 ml capacity stainless steel jug is invaluable for frothing.
Tamper
Evenly tamps coffee within the filter basket.

PREPARING THE ESPRESSO MACHINE FOR USE

Attaching the cup rail

Align the three rail posts with the holes on top of the Espresso
Machine. Then press the rail posts firmly into the holes.

Removing and washing the water tank

1. Lift the tank slightly, then remove by pulling the bottom
of the tank from the Espresso Machine.
W10553375B_01_EN_v05.indd 9
Coffee Scoop and Shower-Screen Brush
Use one level scoop of coffee for each cup (30 ml) of espresso.
The shower-screen brush will help keep the brew head and
shower screen free of grounds.
Not Shown:
Dual Boilers
Separate boilers eliminate the wait single-boiler machines
require when switching between frothing and brewing. Boiler
heating elements never touch water: they are located on the
outside of the boiler for superb brew temperature consistency
and burnout resistance. Quick-heating boilers reach operating
temperatures in approximately 6 minutes.
Drip-Free System with 3-Way Solenoid Valve
A 3-way solenoid valve virtually eliminates drips by instantly
reducing pressure in the brew group when the pump is
switched off. The filter holder can be removed immediately
after brewing without a messy spray of coffee grounds.
15-Bar Pump
Self-priming water pump comfortably supplies pressure that
perfect espresso demands.
2. Wash the tank in hot, soapy water, and rinse with clean
water. The tank can also be washed in the top rack of the
dishwasher.
3. Place the tank back into the Espresso Machine, making sure
the siphon hoses are placed inside the tank. The rib on
the bottom of the tank fits into the grooves on the base
of the housing.
9
8/28/17 11:57 AM

Publicité

Table des Matières
loading

Table des Matières