Table des Matières
Publicité
Confirm choice by pressing the menu button.
PLEASE NOTE: if the automatic/centralised season change mode has been selected (P09) the MODE
menu does not appear.
Press the menu button, scroll the settings with the + button, confirm ECON with the menu button, by subse-
quently pressing the + button, you can select one of the two operating modes: ECONOMY and COMFORT
Confirm choice by pressing the menu button.
the temperature setpoint of the value set in the P10 parameter, reducing the setpoint for heating and
increasing it for cooling.
The same function can be activated, even in centralised mode, by closing the contact of pin 1 of the RJ45
connector, the function is disabled by opening the contact
Press the menu button, scroll the settings with the + and confirm TIME with the menu button:
HRS: the hour numbers flash, set the correct hour with the +/−, confirm with the menu button
MIN: the minutes numbers flash, set the correct minutes with the +/−, confirm with the menu button
DAY: the day numbers flash, set the correct day with the +/−, confirm with the menu button
MON: the month numbers flash, set the correct month with the +/−, confirm with the menu button
YEA: the year numbers flash, set the correct year with the +/−, confirm with the menu button
Press the menu button, scroll the settings with the + and confirm PROG with the menu button:
Select the weekday to programme by scrolling with the + button:
SUN = Sunday
MON= Monday
TUE= Tuesday
WED= Wednesday
THU= Thursday
FRI= Friday
SAT= Saturday
6
20
Cooling function
Fan only function
Select ECONOMY-COMFORT operating mode
ECONOMY
COMFORT
= in COMFORT mode the thermostat works according to the temperature setting
= if you activate the ECONOMY function you are setting a reduction in energy consumption changing
Time and date clock setting
Weekly programming
6
Manuale di installazione e uso - Installation and user manual | 12_05_00_02
ITA
INDICAZIONI LED
Cooling function
RAFFREDDAMENTO
Confirm choice by pressing the menu button.
- Termostato in richiesta:
PLEASE NOTE: if the automatic/centralised season change mode has been selected (P09) the MOD
Led verde acceso con ventilatore ac-
menu does not appear.
ceso e valvola aperta
Led verde lampeggiante (1 secondo
ogni 2 secondi) con ventilatore spen-
Select ECONOMY-COMFORT operating mode
to e valvola aperta (ventilatore in at-
tesa dell'abbassamento della tempe-
Press the menu button, scroll the settings with the + button, confirm ECON with the menu button, by
ratura dell'acqua <15°C)
quently pressing the + button, you can select one of the two operating modes: ECONOMY and COMF
- Termostato a set-point raggiunto:
ECONOMY
Led spento (ventilatore spento e
valvola chiusa)
Confirm choice by pressing the menu button.
= in COMFORT mode the thermostat works according to the temperature setting
= if you activate the ECONOMY function you are setting a reduction in energy consumption ch
the temperature setpoint of the value set in the P10 parameter, reducing the setpoint for heating and
Cooling function
Heating function
increasing it for cooling.
The same function can be activated, even in centralised mode, by closing the contact of pin 1 of the
RISCALDAMENTO
connector, the function is disabled by opening the contact
Confirm choice by pressing the menu button.
- Termostato in richiesta:
PLEASE NOTE: if the automatic/centralised season change mode has been selected (P09) the MODE
Led rosso acceso con ventilatore ac-
menu does not appear.
ceso e valvola aperta
Led rosso lampeggiante (1 secondo
Time and date clock setting
ogni 2 secondi) con ventilatore spen-
Select ECONOMY-COMFORT operating mode
to e valvola aperta (ventilatore in at-
Press the menu button, scroll the settings with the + and confirm TIME with the menu button:
tesa dell'innalzamento della tempe-
Press the menu button, scroll the settings with the + button, confirm ECON with the menu button, by subse-
HRS: the hour numbers flash, set the correct hour with the +/−, confirm with the menu button
ratura dell'acqua >35°C)
quently pressing the + button, you can select one of the two operating modes: ECONOMY and COMFORT
MIN: the minutes numbers flash, set the correct minutes with the +/−, confirm with the menu button
DAY: the day numbers flash, set the correct day with the +/−, confirm with the menu button
- Termostato a set-point raggiunto:
ECONOMY
MON: the month numbers flash, set the correct month with the +/−, confirm with the menu button
Led spento (ventilatore spento e val-
YEA: the year numbers flash, set the correct year with the +/−, confirm with the menu button
vola chiusa)
Confirm choice by pressing the menu button.
= in COMFORT mode the thermostat works according to the temperature setting
= if you activate the ECONOMY function you are setting a reduction in energy consumption changing
the temperature setpoint of the value set in the P10 parameter, reducing the setpoint for heating and
Weekly programming
increasing it for cooling.
Press the menu button, scroll the settings with the + and confirm PROG with the menu button:
The same function can be activated, even in centralised mode, by closing the contact of pin 1 of the RJ45
connector, the function is disabled by opening the contact
FILTRO ARIA
Select the weekday to programme by scrolling with the + button:
SUN = Sunday
- Led acceso giallo/arancio = filtro
MON= Monday
sporco (sono trascorse 800 ore di
TUE= Tuesday
funzionamento del ventilatore)
WED= Wednesday
Time and date clock setting
THU= Thursday
Procedura di reset filtro sporco:
FRI= Friday
Press the menu button, scroll the settings with the + and confirm TIME with the menu button:
effettuare N°5 transizioni veloci
SAT= Saturday
HRS: the hour numbers flash, set the correct hour with the +/−, confirm with the menu button
(fra una e l'altra non devono trascor-
MIN: the minutes numbers flash, set the correct minutes with the +/−, confirm with the menu button
rere più di tre secondi) fra le velocità
DAY: the day numbers flash, set the correct day with the +/−, confirm with the menu button
minima (I) e media (II).
MON: the month numbers flash, set the correct month with the +/−, confirm with the menu button
YEA: the year numbers flash, set the correct year with the +/−, confirm with the menu button
6
Weekly programming
Press the menu button, scroll the settings with the + and confirm PROG with the menu button:
Select the weekday to programme by scrolling with the + button:
SUN = Sunday
MON= Monday
TUE= Tuesday
WED= Wednesday
THU= Thursday
FRI= Friday
SAT= Saturday
Manuale di installazione e uso - Installation and user manual | 12_05_00_02
ENG
LED INDICATIONS
Cooling function
COOLING
Fan only function
Confirm choice by pressing the menu button.
- Thermostat demand:
PLEASE NOTE: if the automatic/centralised season
Led green on with fan running and
menu does not appear.
valve open
Led green blinking (1 time every 2 se-
cond) with fan stop and valve open
Select ECONOMY-COMFORT operating mo
(fan it is in stand-by because the wa-
ter temperature it is > 15°C)
Press the menu button, scroll the settings with the +
quently pressing the + button, you can select one of
- Thermostat in the set point reached:
COMFORT
ECONOMY
Led off (fan stop and valve closed)
Confirm choice by pressing the menu button.
= in COMFORT mode the thermostat works a
= if you activate the ECONOMY function you a
the temperature setpoint of the value set in the P10
Heating function
increasing it for cooling.
The same function can be activated, even in central
HEATING
Fan only function
connector, the function is disabled by opening the c
- Thermostat demand:
Led red on with fan running and valve
open
Led red blinking (1 time every 2 se-
Time and date clock setting
cond) with fan stop and valve open
(fan it is in stand-by because the wa-
Press the menu button, scroll the settings with the +
ter temperature it is < 35°C)
HRS: the hour numbers flash, set the correct hour w
MIN: the minutes numbers flash, set the correct min
DAY: the day numbers flash, set the correct day with
- Thermostat in the set point reached:
COMFORT
MON: the month numbers flash, set the correct mon
Led off (fan stop and valve closed)
YEA: the year numbers flash, set the correct year wi
Weekly programming
Press the menu button, scroll the settings with the +
AIR FILTER
Select the weekday to programme by scrolling with
SUN = Sunday
- Led on yellow or orange = dirty filter
MON= Monday
(After 800 hour of fan operation)
TUE= Tuesday
WED= Wednesday
THU= Thursday
Reset dirty filter:
FRI= Friday
make no. 5 fast transition
SAT= Saturday
(no more than three seconds should
pass between one and the other)
between minimum (I) and medium
(II) speeds.
6
Manuale di installazione e uso - Installation and user manual | 12_05_00_02
Heating function
Fan onl
COMFO
Manuale di installazione e uso - Installa
Publicité
Table des Matières
