Table Des Matières; Introduction - FAURE HERMAN UltraFlux Minisonic II Manuel D'instruction

Introduction

Thank you for choosing the Minisonic II: we hope you will appreciate all its metro-logical qualities
and ease of use.
The purpose of this manual is to guide you as simply as possible towards using the instrument
confidently to achieve results that match your expectations.
Specializing in ultrasonic flow meters since 1974, Ultraflux develops, manufactures and sells
solutions based on the principle of differential ultrasonic transit times.
This method provides non-intrusive, constant and bi-directional flow measurements.
Ultraflux flow meters allow non-intrusive or intrusive, constant or occasional flow measurements
on any type of homogeneous fluid (liquid or gas) and through any type of homogeneous
material.
Always aiming to better serve its customers' needs while preserving the environment, Ultraflux
has been committed for many years to a quality improvement and sustainable development
policy.
Since it started in 1974, Ultraflux has developed and manufactured all its products in France,
in order to ensure that its production processes are reliable and meet the standard required.
ISO Certifications
Ultraflux is certified ISO 9001 and ISO 14001.
You can download the certificates : ISO9001- ISO14001
http://www.ultraflux.net/downloads/certificates
Electrical Certifications
Minisonic complies with the Low Voltage Directive (DBT) according to EN 61010-1
ATEX Certifications
Some Ultraflux products are also certified for use in ATEX hazardous areas.
You can download the documents:
http://www.ultraflux.net/downloads/certificates
2
Contents
Introduction
Contents
Safety instructions
General characteristics
Wiring of the Minisonic
Minisonic configuration
Implementation of a measuring point
Application example
Software update procedure
Logger / Retrieving recordings
Measuring signal gain adjustment mode
2
3
4
5
8
14
28
34
36
38
39
3