Connection To The Mains - S&P SL-2500N A Manuel D'instructions

Masquer les pouces Voir aussi pour SL-2500N A:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 11
DESCRIPTION OF THE MODELS (FIGURE 1)
1. Metal casing
2. Outlet adjustable air output (360º).
3. Automatic movement sensor (Model SL-2500N A)
4. Manual function button (Model SL-2500N)
5. Screws
6. Air input grill
INSTALLATION
• Carefully read the safety warnings listed above before installing the appliance.
• (Figure 2) Ensure that the installation site respects the minimum clearances indicated. We
recommend you vary the height at which you install the appliance depending on whether it
is to be installed for use by men or women.
• Ensure that the wall on which the appliance is to be installed is capable of supporting its
weight (6 kg), allowing also for a safety margin.
• Ensure that the lower part of the appliance is unobstructed, in such a way that nothing
impedes the air input into the appliance.
• (Figure 1) Remove the two screws located on the lower part of the appliance (5). Keep the
screws and put them back in place once the appliance has been wall-mounted.
• (Figure 1) Remove the metal cover (1) making sure the earth cable and the electrical con-
nector are disconnected.
• Using the template supplied with the appliance, mark the position of the 4 holes taking
into account the position of the holes for the electrical cables and respecting the minimum
distances (Figure 2-A).
• Drill the four holes with an 8mm diameter and use the screws supplied to attach the body of
the appliance to the wall. Ensure that the screws are appropriate for the type of wall. Then,
proceed with the electrical connections.

CONNECTION TO THE MAINS

• Carefully read the safety warnings listed above before installing the appliance. Ensure that
the power is completely disconnected.
• Ensure that the mains cables have the required gauge for the power of the appliance
(2500W / 11 A).
• Connect the mains cables as per the connection data sheet:
• Reconnect the earth to the front cover and the electrical connector. Then, replace the front
cover of the appliance and fix it with the two screws removed earlier.
Measurement Y
Men
Women
N (blue) // L (brown) //
8
1.2 m
1.1 m
(Yellow – green)

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Sl-2500n

Table des Matières