Standstill And Disposal; Technical Data - Helios AMD Serie Notice De Montage Et D'utilisation

Installation and Operating Instructions
WARNING
nm
CHAPTER 5

TECHNICAL DATA

AMD / AMW.. – Medium Pressure Fans
4.4

Standstill and disposal

WARNING
When dismantling, live parts can be exposed, which can result in electric shock if touched. Before dismant-
ling, isolate the unit from the mains power supply and protect against being switching on again!
The generally applicable safety at work and accident prevention regulations must be observed!
– Electrical work must only be carried out by an authorised electrician
– Fully isolate electrical connection from mains power supply
– Use appropriate lifting equipment and fastening devices to dismantle the fan
– Observe the instructions in the electric motor maintenance manual for decommissioning the motor
– Dispose of the fan components according to the valid rules and laws.
5.0 Type plate
The product-specific technical data can be found on the type plate. The individual data is described below using an
example. .
Standard type plate:
e
u
Fan type plate key:
q Manufacturer's address
w Fan mark:
CE = CE mark
e Version:
AMD = type designation; altern. current
280 = size
/2 = pole
Special type plate:
w
e
t y
Fan type plate key:
q Manufacturer's address
w Version:
AMD = type designation; altern. current
400 = size
/4 = pole
e Item number
q
r
t
i
r Item number
t Series number
y Production code
u Technical data
i Corresponding installation instructions
r
u
r Series number
t Fan mark:
CE = CE mark
y Technical data
Further data see motor type plate
(attached to fan)
u Production code
9
Fig.5
w
y
Fig.6
q
UK