Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
MAINTENANCE
CLEANING THE SELF-BEARING METAL GREASE FILTERS
Resetting the alarm signal
• Turn the Lights and the Suction motor off.
• Press button H and hold for at least 2 seconds, confirmation is
provided by the fact that the Led goes out.
Cleaning the Filters
• These filters can be washed in a dishwasher, and need to be
cleaned when the Led on Button H lights up in a continuous
manner or at least once every approximately two months' use,
or more frequently in the case of particularly intensive use.
• Remove the Filters one at a time, supporting them with one
hand while you pull the lever down with the other.
• Wash the Filters without bending them, and leave them to dry
before replacing them.
• Replace the filters, taking care to ensure that the handle is fac-
ing outwards.
EN
Metal grease filters
2
25
5
Publicité
Table des Matières
