Unpacking The Equipment; Positioning And Installation; General Warnings; Roof Installation - Mark TA209 Livret Technique

Place the goods down with care, avoiding sudden movements or, worse, dropping the goods.
!
IT IS ABSOLUTELY FORBIDDEN to station under suspended loads and inside the movement area
!
of the lifting equipment.
When handling the units, use suitable means according the weights involved, as envisaged by EC
!
Directive 89/391 and subsequent amendments.
Lifting must only be carried out by qualified personnel.

2.3 Unpacking the equipment

Free items from the packaging material and collect the packaging to avoid potential danger of fire and
suffocation of persons or animals.
Leave the machine on its packaging base until the installation to avoid damages.
Disposal of packaging materials must be conform to the regulations in force in the country of
!
destination where the evaporative cooling unit is installed.
2.4 Storage
During transportation and storage, make sure that the environmental temperature is between -10
and 50 °C. If the ColdStream evaporative cooling unit must be stored, make sure that the relative
humidity in the warehouse is between 5% and 90%.

3.0 Positioning and installation

3.1 General warnings

Before proceeding to install, make sure that each evaporative cooling unit has been unpacked and
checked for damage.
Positioning and installation of the evaporative cooling units must be carried out by qualified
personnel and by observing the laws in force in the country of destination.

3.2 Roof installation

3.2.1 TA Evaporative coolers
6
Prepare and fix an air inlet flanged duct. The flange has to be of the
same dimension of the unit's trunk duct flange.
The unit is equipped with a trunk of flanged duct that will be fixed to the
flange of the inlet duct prepared before.
Position the evaporative cooler base to the inlet duct and fix the two
flanges (base duct flange-inlet duct flange) together by using provided
bolts.
It is recommended to insert some silicon paste between the two
flanges to guarantee perfect insulation from external agents.