All Rights Reserved - Mark TA209 Livret Technique

Read this document before
Incorrect installation, adjustment, alteration, repair or maintenance work may lead to material
damage or injury. All work must be carried out by certified, qualified professionals. If the
appliance is not positioned in accordance with the instructions, the warranty shall be rendered
void. This appliance is not intended for use by children or persons with a physical, sensory or
mental handicap, or who lack the required experience or expertise, unless they are supervised
or have been instructed in the use of the appliance by somebody who is responsible for their
safety.Children must be supervised to ensure that they do not play with the appliance.
1.0 General

1.1 All rights reserved

The manufacturer has a policy of continuous product improvement and reserves the right to make
changes to the specifications without prior notice. The technical details are considered correct but
do not form the basis for a contract or warranty. All orders are accepted subject to the standard
terms and conditions of sale and delivery (which will be sent to you at your request).
1.2 General warnings
Installation must comply with the relevant local and/or national regulations. You must therefore
have the ColdStream installed by a professionally qualified installer in accordance with all applicable
national and international regulations. Faulty installation, adjustment, alteration, maintenance activity
or repair shall render the warranty void.
The machine is conforming to the following European Community Directives:
2006/42/EEC Machinery Directive
2006/95/EEC Low Voltage Directive
2004/108/EEC Electromagnetic Compatibility Directive
The information in this document is subject to change without notice. The most recent version of
this manual is always available at www.markclimate.com/downloads.
1.3 Presentation of the ColdStream Evaporative Cooler
To improve the summer microclimate inside a production unit, sales or other area, it is necessary
to ventilate the environment with frequent changes of fresh, filtered and possibly cool air. For large
areas such as industrial buildings, an air conditioning plant is frequently not adaptable due to the
great volume of air to be cooled and the thermal loads of processes to be neutralized, the necessary
amount of energy is very high and the cooling effect is reduced by the exhaust air extraction plant
and by frequent opening of the doors during normal activity.
Evaporative cooling plants that cool the air using a natural principle represent an optimal solution:
the air passes through special wet water filters, loosing part of its heat during the evaporation
process of the water and hence lowering the air temperature. The absence of refrigeration plants
reduces energy consumption to a minimum and enables great volumes of air to be treated for the
many air changes necessary.
installing the appliance
Warning
EN
3