5. Lights
Not every wheelchair has been equipped
with lights. You can activate the following
functions only by using VR2 Lights and/or VR2
Seat&Lights:
•
Lights (I in figure 4)
•
Hazard Lights (J in figure 4)
•
Direction indicators (K1 & K2 in figure 4)
6. Troubleshooting
If the wheelchair will not function while the
batteries are fully charged, check the following
points before consulting your dealer:
•
Switch the controller off and then switch it on
again. Check to see if the malfunction has
been solved.
•
Check if the free wheel switch was switched
to Drive.
•
Check if the joystick was in the 0 position
when the controller was switched on. In
other words, the joystick must not be moved
when the controller is being switched on or
off.
Malfunctions list
An extended malfunction list can be found in
the appendix of the service manual (for qualified
specialists only). The service manual can be
found on www.SunriseMedical.com.au
10
(Fig. 6)
VR2 Contoller
Rev.A