geminox QAA 73.110 Notice Technique page 31

Buttons
Press buttons "+ or -" and "Prog" to enter the required combination of the access
code.
- Correct combination : you reach the programming mode "OEM BMU" (6. Level)
Successive
display:
4
et
- Wrong combination : the display will change to the programming mode "LMU"
P R O G
(5.level).
Successive
display :
Press the line selection buttons to select the required line.(rep. b).
- All possible lines are indicated in § 2 - section IV - Parameter list
5
P R O G
Press the plus or minus button to enter the required value (rep. c). The setting will
be stored as soon as you leave the programming mode or change to another line.
6
- The parameter list containing all possible settings is indicated in
§ 2 - section IV - Parameter list
By pressing the Info button, you leave the programming mode "OEM"
7
Explanation
b)
- 11 -
OPERATING LEVELS
Line
c)
. . .
Permanent
display