Dual Hood - Airia LIFEBREATH PURE PERFORMANCE ERV Serie Guide D'installation

Dual Hood Part 99-190
With the Lifebreath Dual Hood, only one 6 in hole is required in the exterior wall to complete two
connections: fresh air intake and stale air exhaust.
Side View
8.25"
6"
Top View
8.25"
6"
Note

Tested by: National Research Council Canada

Program: Building Regulations for Market Access Report Number: A1-007793

Report Date: 15 February 2016

Found to comply with requirement as set in the NBC
Attention/Caution
Contact your local building authority before installation of the Dual Hood to verify compliance with

local building codes.
Caution:
 Sealant must be applied as per instructions or leakage and condensation may occur.
Insulate the Fresh Air Supply and Stale Air Exhaust duct work back to the unit.

25"
21.5"
13"
SideView of Hood and Backplate
5" 6"
Stale Air
Exhaust
Fresh Air
Intake
13