Grille Fittings - Airia LIFEBREATH PURE PERFORMANCE ERV Serie Guide D'installation

Grille Fittings

Quick Mount Fitting
(part # 99-QM6)
Use this rough-in fitting before the drywall is
Installed.

Nail fitting onto the stud.

Available size: 6 in.
Connect to ERV ducting
Quick Mount
Fitting
1/2 in drywall
Terminator Fitting
Use this rough-in fitting before the drywall is installed.

Nail or screw fitting onto the stud or joist.

Available sizes: 4 in, 5 in and 6 in.

Use this rough-in fitting before the drywall is installed.

Adapts to ridged and flex ducting

Strong attachment for grilles, either vertically or horizontally
Connect to ERV ducting
Ceiling / wall
drywall
Flush mount the lip
of the Terminator
fitting to the drywall
Caution
Do not mount exhaust grille within 4 ft (1.2 m) (horizontally) of a stove to prevent grease from entering the unit.

2 x 4 Stud
Nail or screw quick
mount fitting to stud
TechGrille
(part # 99-TM 4/5/6)
Terminator
Fitting
Nail / screw to
secure stud or
joist
TechGrille
Stack Head Elbow
Use this rough-in fitting before the drywall is installed. This
fitting is ideal for running ducting through 2 x 4 (min.)
studded walls.

Nail to stud.

Available sizes are 4 in and 6 in.
Suspended Ceiling Fitting
Use this fitting for ceiling tiles or finished/installed drywall.

Cut a hole through the ceiling tile, insert the fitting and use the
retaining ring to hold the fitting in place.

For finished/installed drywall, use caulking around the lip if you do
not have access to attach the retaining ring.

Available size: 6 in.
Connect to ERV ducting
Retaining ring
Flush mount the lip of the
ceiling fitting to ceiling
(part # 99-WF4 / 99WF6)
Nail stack head
elbow onto stud
2 x 4 Stud
1/2 in drywall
Stack Head
Elbow
Connect to ERV ducting
(part # 99-CF6)
Ceiling
Fitting
Ceiling
TechGrille
11