Facnor FACSLIDE F10 Manuel D'instructions page 16

top
REMOVING THE PIN FROM THE BATTEN OR INTERMEDIATE CARS
Push the spring to only release the pin. For locking push simply the pin.
Your « FACSLIDE + » system has been carefully designed and manufactured so
that it brings you full satisfaction for a long time. However, it is necessary to follow the
below basic maintenance :
Clean with fresh water (only) the whole system (tracks and cars) regularly.
Never apply any greasy or lubrificating products on the tracks and cars.
16
www.facnor.com
9- To fit more easily the following cars, use a stop (like a
screw or a cap you put into the track drill) that will prevent
the cars from sliding down.
10-
1
The "click" sound indicates it is locked.
MAINTENANCE ADVICES
/ FACSLIDE +
pin head upwards
Slide the cars upwards onto the standard track.
CAUTION : CHECK THE FITTING ORDER OF
THE CARS
/ Notice de montage - Assembly instructions
2