Rinse+Spin; Options And Extra Functions; Add Garment - LG WT7800C Serie Manuel Du Propriétaire

will be added to gradually increase the water
temperature to help remove stains that require
treatment at higher temperatures.
NOTE
• Best results are obtained with smaller loads (less
than 6 lb.)

Rinse+Spin

Select this option to rinse and spin a load
separately from a regular cycle. This can be helpful
in preventing fresh stains from setting in fabrics.
1
Press the Power button to turn on the
washer.
2
Press the Special Care button repeatedly until
Rinse+Spin is selected.
3
Press the Start/Pause button to begin.

Add Garment

If you've forgotten to add an item or need to
remove foreign objects like coins or keys after the
cycle has started, the best time to do so is while
the Add Garment indicator is on.
• Once the indicator turns off, adding garments
may affect the cycle time or wash performance.
1
Press the Start/Pause button. The cycle
pauses and the lid (door) unlocks.
2
Open the lid, add garments or remove foreign
objects, and close the lid.
3
Press the Start/Pause button to resume the
cycle. The cycle continues automatically.
NOTE
• This washer is equipped with a special drain
feature that is designed to make your washer as
safe as possible. If the washer is paused or shut
off while there is still water in the tub, the water
will drain automatically after several minutes of
inactivity. This helps keep children safe by
reducing the possibility of water remaining in
the tub.
Any water remaining in the tub will automatically
drain 4 minutes after the washer has shut off. If
the washer is paused and the Start/Pause
button is not pressed within 60 minutes, the
washer will shut off and all cycle settings will be
lost. And any water remaining in the tub will be
drained.
The washer can be turned on or restarted any
time before the drain begins. However, once the
washer begins to drain, all controls and
functions will be disabled until the water has
been completely drained and the washer shuts
off.
Remote
If Remote Start function enable, the Remote
indicator is on.
• Refer to SMART FUNCTIONS to enable Remote
Start function.

Options and Extra Functions

Your washer includes several additional cycle
options to customize cycles to meet your individual
needs.
• Select the desired option after selecting the
desired cycle and settings.
NOTE
• The LED for the option will light when the option
is selected.
• To protect your garments, not every option is
available with every cycle.
• A chime will sound twice and the LED will not
light if the selected option is not allowed for the
selected cycle.
Cold Wash
Use this option to save energy by using cooler
water while increasing the wash and rinse times to
maintain wash performance.
• Wash time will increase up to several minutes
with this option.
• For best wash results, only wash small loads (less
than 8 lb) with this option.
Delay Wash
Once you have selected the cycle and other
settings, press this button to delay the start of the
wash cycle.
• Each press of the button increases the delay
time by 1 hour, for up to 19 hours.
OPERATION 29