Remove And Clean The Burner Orifice - Norcold Nx64 Manuel Du Propriétaire

Masquer les pouces Voir aussi pour NX64:
Table des Matières
Les langues disponibles

Les langues disponibles

!
The burner box cover can be hot. Wear gloves to avoid burns.
CAUTION
- Remove the drip cup by removing the screw.
- Remove the burner box cover by removing the screw.
- Look at the gas flame [75] (See Art02401).
- The flame should be:
- a darker blue color on the inside of the flame and a lighter blue color on the
outside of the flame.
- a constant shape without flickering.
- Contact your dealer or Norcold authorized service center if the flame is:
- yellow
- flickering or changing shape.
- Make sure the flame does not touch the inside of the flue tube [76].
- If the flame touches the inside of the flue tube, contact your dealer or Norcold
authorized service center.
- Close the burner box door.

Remove and clean the burner orifice:

Your dealer or Norcold authorized service center must do this procedure.
Remove and clean the burner orifice (See Art00956):
- Close the valve at the propane gas tank(s).
- Push the ON / OFF button to shut down the refrigerator.
The burner box cover can be hot. Wear gloves to avoid burns.
!
CAUTION
- Open the lower intake vent.
- Remove the drip cup by removing the screw.
- Remove the burner box cover by removing the screw.
To avoid possible propane gas leaks, always use two wrenches to loosen and tighten the gas supply line
!
WARNING
connections.
- Remove the flare nut from the orifice assembly [77] (See Art00956).
- Remove the orifice assembly from the burner [78].
Do not try to remove the orifice [79] from the orifice adapter [80] when cleaning. Removal will damage
!
the orifice and seal of the orifice and can cause a propane gas leak. Leaking propane gas can ignite or
WARNING
explode which can result in dangerous personal injury or death. Do not clean the orifice with a pin or
other objects.
- Clean the orifice assembly with air pressure and alcohol only.
Owner's Manual 16
76
75
Art02401
80
78
77
79
Art 00956

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

Nx64imNx84Nx84im

Table des Matières