Components; Indoor Base Station (Receiver) Features - ThermoPro TP-60 Mode D'emploi

NOTE!
Only use a dry cloth to clean the exterior of the device.
EN
Do not use any cleaning fluid to avoid damaging the
electronics.

Components

1. One base station unit (Receiver).
2. One remote sensor (Transmitter).
3. Four AAA size batteries (included).

Indoor Base Station (Receiver) Features

Outdoor
temperature
Outdoor
humidity
Indoor
temperature
Channel/
SYNC
Battery
Compartment
Indoor
humidity
Stand
-5-
1. LCD display: Displays the current outdoor humidity/
temperature and indoor humidity/temperature.
2. Battery Compartment: Holds 2 AAA batteries to power
the unit.
3. Tabletop and wall-mounted design.
4. Indoor Temperature range: -4°F ~ 158°F (-20°C ~ 70°C).
5. Humidity range: 10% ~ 99%.
6. Temperature display unit: °C and °F selectable.
7. Temperature Resolution: 0.1 °C/°F.
8. Humidity Resolution:1%.
9. Low battery indication.
Buttons
CHANNEL/SYNC: Press once to display the temperature
and humidity readings from up to 3 outdoor remote sensors;
Press and hold this button to enter the synchronization
mode.
MAX/MIN/CLEAR: Press once to display the maximum
or minimum temperature and humidity; Press and hold to
-6-
EN