Technical Data; Proper Use; Before Starting The Equipment; Assembling The Equipment - HERKULES H-NT 20 Instructions D'origine

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 20
sales outlet where you made your purchase at
the latest within 5 working days after purchasing
the product and upon presentation of a valid bill
of purchase. Also, refer to the warranty table in
the service information at the end of the operating
instructions.
Open the packaging and take out the equip-
ment with care.
Remove the packaging material and any
packaging and/or transportation braces (if
available).
Check to see if all items are supplied.
Inspect the equipment and accessories for
transport damage.
If possible, please keep the packaging until
the end of the guarantee period.
Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, foils or small parts. There is a danger of
swallowing or suff ocating!
Flexible suction hose
Dirt bag
Foam filter
Upholstery nozzle
Crevice nozzle
Combination nozzle
Handle
Pleated filter with cover
2-piece suction tube
Castor (4x)
Fastening screws for castors (4x)
Wire bracket
Original operating instructions

3. Proper use

The wet and dry vacuum cleaner is designed
for wet and dry vacuuming using the approp-
riate fi lter. The appliance is not suitable for the
vacuuming of combustible, explosive or harmful
substances.
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Anl_H_NT_20_SPK7.indb 14
Anl_H_NT_20_SPK7.indb 14
GB
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.

4. Technical data

Mains voltage: ........................ 220-240 V ~ 50 Hz
Power consumption: ................................. 800 W
Tank volume: ..................................................20 l
Weight: ......................................... approx. 7.2 kg
Protection class: ...........................................II /

5. Before starting the equipment

Warning!
Before you connect the equipment to the mains
supply make sure that the data on the rating plate
are identical to the mains data.

5.1 Assembling the equipment

Fitting the castors (Fig. 4/12)
Fit the castors (12) in accordance with Fig. 4.
Fitting the wire bracket for winding up the
cable an suction hose (Fig. 5/2)
Fit the wire bracket for winding up the cable and
suction hose as shown in Fig. 5. After use, the
cable and the suction hose can be wound onto
the wire bracket.
Fitting the appliance head (Fig. 6)
The appliance head (5) is fastened to the contai-
ner (10) by the locking hook (18). To remove the
appliance head (5), open the locking hook (18)
and remove the appliance head (5). When fi tting
the appliance head (5), make sure that the lo-
cking hook (18) locks into place correctly.
5.2 Fitting the fi lter
Notice!
Never use the wet and dry vacuum cleaner wit-
hout a fi lter.
Check that the fi lter is securely fi tted at all times.
Fitting the foam fi lter (Fig. 7/25)
For wet vacuuming, slip the supplied foam fi lter
(25) over the fi lter basket (Fig. 2/20). The pleated
fi lter (Fig.3/24) already fi tted upon delivery is not
suitable for wet vacuuming.
- 14 -
19.02.2018 15:30:19
19.02.2018 15:30:19

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

23.424.00

Table des Matières