Qlima D 110 Manuel D'utilisation page 19

≥ 40cm
≥ 20cm
≥ 20cm
≥ 20cm
≥ 20cm
Fig. 3
Before connecting the unit, check the following:
• The voltage supply must correspond with the
mains voltage stated on the rating label.
• The socket and power supply must be suitable
for the current stated on the rating label.
• The plug on the cable of the device must fit into
the wall socket.
• The device must be placed on a flat and stable
surface.
The electricity supply to the device must be
checked by a recognised professional if you have
any doubts regarding the compatibility.
• This appliance is not intended for use by per-
sons (including children) with reduced physical,
sensory or mental capabilities, or lack of expe-
rience and knowledge, unless they have been
given supervision or instruction concerning use
of the appliance by a person responsible for
their safety.
• This device is manufactured according to CE
safety standards. Nevertheless, you must take
care, as with any other electrical device.
• Do not cover the air inlet and/or outlet.
• Empty the water reservoir before moving the
unit.
• Never allow the device to come into contact
with chemicals.
• Never submerge the unit in water.
• Do not insert objects into the openings of the
unit.
• Always remove the plug from the electric power
supply before cleaning or replacing the unit or
components of the unit.
4
19