Identification; Product Description And Type Designation; Product Overview; Range Of Use - Videotec MAXIMUS MBX Manuel D'instructions

4 Identification

4.1 Product description and type
designation
MAXIMUS MBX is a box for installation in potentially
explosive atmospheres.
MAXIMUS MBX is composed of a body and cover in
stainless steel AISI 316L casting.
The surface treatments further increase its resistance
to corrosion.
MAXIMUS MBX is equipped with NPT or metric type
threaded cable inputs depending on the model.
MAXIMUS MBX has an IP66/IP68/IP69 level of
protection and can be installed in environments with
temperatures from -40°C to 80°C (check the marking
for each of the available models).

4.2 Product Overview

The main parts of the product are illustrated below.
1. Explosion-proof box.
2. Cover.
Fig. 1
MNVCMBX_2222_EN

4.3 Range of use

The unit is designed for use in a fixed location, for
surveillance of areas classified as zone 1-21 and zone
2-22 with potentially explosive atmospheres.
The unit has been built and certified in compliance
with directive 2014/34/UE and with the international
standards IECEX, which define its range of application
and minimum safety requirements.

4.4 Specific use conditions

Ambient temperature and Surface temperature – see
instructions.
Contact the manufacturer for information on the
dimensions of the flameproof joint.
Care shall be taken to prevent accumulation of
electrostatic charges. See installation instructions.
02
01
7