Product Specifications - brondell Swash CL825 Serie Manuel De L'utilisateur

PRODUCT SPECIFICATIONS

Model
Power Voltage
Power Consumption
Supply Water Pressure
Dimensions
Weight
Remote Control Dimensions
Weight Limit
Operating Temperature
Mesh Filter
Rear Cleansing
Front Cleansing
Standard Time
Water Pressure Control
Water Temperature Control
Heater Power Consumption
Safety Devices
Seat Temperature Control
Heater Power Consumption
Safety Devices
NOTE: The specifications listed above are subject to change without prior notice for
reasons of improving the product performance.
22
BRONDELL SWASH ADVANCED BIDET SEAT
100 kPa – 690 kPa / 14.5 psi – 100 psi
Elongated: 38.1 cm x 52.8 cm x 14.4 cm / 15 in x 20.8 in x 5.7 in
Round: 38.1 cm x 49.3 cm x 14.4 cm / 15 in x 19.4 in x 5.7 in
Elongated: 6.5 kg / 14.3 lbs / Round: 6 kg / 13.2 lbs
3.1 cm x 12.7 cm x 2.5 cm / 2 in x 5 in x 1 in
with Holster: 6.4 cm x 14 cm x 2.8cm / 2.5 in x 5.5 in x 1.1 in
149.7 kg / 330 lbs
0° C / 32° F – 40° C / 104° F
2.5 cm x 2.0 cm diameter / 0.99 in x 0.8 in diameter
WARM WATER CLEANSING DEVICE
Maximum 0.5 L / 0.1 gal per minute, automatic nozzle self-cleaning
Maximum 0.5 L / 0.1 gal per minute, automatic nozzle self-cleaning
Rear Cleansing: 2 minutes / Front Cleansing: 2 minutes
4 Levels: Off - incoming water temperature, Low - 31.7° C / 89° F,
Medium - 34.5° C / 94.1° F, High - 37.5° C / 99.5° F
Bimetal, temperature sensor,
temperature fuse (overheating prevention), micro switch
HEATED SEAT
4 Levels: Off - room temperature, Low - 31° C / 87.8° F,
Medium - 34° C / 93.2° F, High - 37° C / 98.6° F
Bimetal, temperature sensor,
temperature fuse (overheating prevention)
CL825-EW
120 V, 60 Hz
1200 W
3 Levels
1200W
60 W