Product Operation; Swash Operation; Product Specifications; Technical Specifications - brondell Swash CL99 Manuel Du Propriétaire

PRODUCT OPERATION

SWASH OPERATION

With the intuitive Wash Control Dial on the right-hand side of
your seat, you can easily select your wash settings and water
pressure using these instructions:
Off
To close off the valve and stop the flow of water, turn the dial
back to its original center position so that the indicator hash
on the dial aligns with the top notch on the body of the seat .
Front Cleansing
For front (feminine) wash, turn the dial clockwise (or roll it
forward) while seated . The further the dial is turned, the
stronger the water pressure will be .
Rear Cleansing
For rear (posterior) wash, turn the dial counterclockwise
(or roll it back) while seated . The further the dial is turned,
the stronger the water pressure will be .
Self-Cleaning Nozzles
The nozzles will initially go through a brief self-clean as you
turn the dial between front cleansing and rear cleansing and
will last as long as the dial is in that position .
8 8
(Non-shaded area represents active setting)

PRODUCT SPECIFICATIONS

TECHNICAL SPECIFICATIONS

SWASH CL99 - Ambient Temperature
Model
Supply Water Pressure
Elongated: 14 .39 in x 20 .03 in x 2 .55 in
Dimensions
Weight
Seat / Lid Weight Limit
Swash CL99
14 psi – 100 psi
Round: 14 .34 in x 18 .47 in x 2 .55 in
Elongated: 4 .3 lbs / Round: 4 .5 lbs
330 lbs / 330 lbs
9 9