Frequently Asked Questions - Dell Precision 350 Guide De Configuration Et De Référence Rapide

Light Pattern
GGGG
How Do I...
Set up my computer to use two
monitors?
Connect my monitor when the
monitor cable connector doesn't
seem to fit the connector on the
back of my computer?
30
Setup and Quick Re ference Guide
Problem Description
Normal operating
condition after POST.
If a computer problem occurs that you are unable to resolve through the
steps in this section or the procedures in "Finding Solutions" in your User's
Guide, complete the following steps before you contact Dell:
Write a detailed description of the error, beep code, or diagnostic light
1
problem.
Record your Express Service Code and Service Tag.
2
Contact Dell from the same location as your computer.
3

Frequently Asked Questions

Solution
If your computer has the required
graphics card to support dual-
monitor setup, then look in your
box for a Y-cable. The cable has a
single connector on one end (plug
this connector into the back panel)
and branches into two connectors
(plug these connectors into the
monitor cables). See "Connect the
monitor" on page 11.
If your graphics card has a DVI
connector but your monitor has a
VGA connector, then you need to
use an adapter. An adapter should
be included in the box.
Suggested Resolution
None.
Where to Find Additional
Information
Contact Dell Technical Support
for more information.