Water Pressure - Samsung RS58K Serie Mode D'emploi

Water pressure

If you want to check how much water flows into the ice tray, follow these steps.
A
CAUTION
• Do not press Test repeatedly when the tray is filled with water. Water may overflow or
ice may be jammed.
• Make sure the icemaker bucket is inserted properly. Otherwise, the ice maker will not
operate.
Smart Eco (applicable models only)
A
C
Untitled-74 51
1. Gently lift up the icemaker cover (A) to
remove.
2. Press Test (B) on the side of the
icemaker. Normally, the ice cube
container fills with water in a few
minutes.
3. If the water level is lower than
expected, check the water pressure of
the water supply line from the water
B
source. This is not a system failure.
The Smart Eco system intelligently
B
controls the refrigerator according to
the operating environment in order to
keep food fresh using 4 sensors that are
located on both the inner and outer sides
of the refrigerator. This smart system also
monitors usage patterns and the operating
status to save power consumption.
A. External temperature sensor
B. External humidity sensor
C. Internal temperature sensors
English 51
7/18/2017 5:08:18 PM