Samsung RS58K Serie Mode D'emploi page 55

Sealing guard (applicable models only)
To remove the sealing guard
To reinsert the sealing guard
CAUTION
• Make sure the sealing guard is locked firmly. Otherwise, the guard may cause noise
when you open or close the door.
Untitled-74 55
Gently lift up the guard, and then pull it to
the front while holding the bottom side.
1. Put the guard on the front of the
housing. And then, insert the guard by
lowering it.
2. Press both hooks on the guard to lock
the guard. When the guard is locked
properly, you will hear a clicking sound.
English 55
7/18/2017 5:08:20 PM