Télécharger Imprimer la page

EHEIM Professionel 2226 Mode D'emploi page 12

Masquer les pouces Voir aussi pour Professionel 2226:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 18
External filter 2226 / 2228
Thermofilter 2326 / 2328
Pump head
Sealing gasket
screen
Fine filter pad (white)
Rubber hermetic seals
EZ clips
Filter canister
tor
Hose clamp
Intake pipe
outlet pipe
Spray bar and end cap
clips
Tubing
Vaseline.
Temperature sensor
k
Velcro tape.
22
ATTENTION: 2326 and 2328 thermofilters should only
be used for freshwater.
When unpacking, please check to ensure that all parts have
been included.
Assembly
Flip all four EZ clips open and push upwards. With the help
of the two recessed lid handles, the pump head of the filter
can be easily lifted off.
Remove lattice screen and fine filter pad and take out each
media container by grabbing the retractable handles and pul-
ling upwards. Fill the containers with EHEIM filter media to
achieve best results.
¤
Input connector
Lattice
Coarse foam filter pad (blue)
Filter media containers
Integrated double tap connec-
Intake strainer
Security
Suction cups with
Thermofilter:
Thermostat
Fill the first container with
EHFIMECH, but leave just
enough space so that the
blue filter pad can be placed
in the container under the
retractable handle.
Fill the second (and third)
container with the biological
media EHFISUBSTRAT to
just below the edge.
Do not overfill. Do not clog flow-through pipe.
k
21
Fill the first container with EHFIMECH, but leave just enough
space so that the blue filter pad can be placed in the contai-
ner under the retractable handle. Fill the second (and third)
container with the biological media EHFISUBSTRAT to just
below the edge.
Then thoroughly rinse the filter media in the containers under
running water until all cloudiness has disappeared.
Insert the second (and third) media container in the same
manner. Make sure the flow-through pipe openings line up
on top of each other. Put second and/or third rubber herme-
tic seals on the upper media container. Lower each retracta-
ble handle and ensure that all media containers lie flush on top
of each other.
Then insert the fine filter pad (white) and the lattice screen in
such a manner that the round cut-out lines up with the re-
spective flow-through pipe opening.
ATTENTION:
Fine filter pad (white) should
retractable handle of the media container.
9
not be placed under the
GB

Publicité

loading

Ce manuel est également adapté pour:

Professionel 2228