Operation; Transport; Storage; Care And Maintenance - Kärcher NT 50/1 Me Classic Manuel D'utilisation

Drain off dirt water
NT 70/2, NT 90/2 only:
CAUTION
Please observe the local provisions regard-
ing the wastewater treatment.
Illustration
 Drain off dirty water through the drain-
age hose.
Clip connection
Illustration
The suction hose is equipped with a clip
system. All C-40/C-DN-40 accessories can
be connected.

Operation

Turning on the Appliance
 Plug in the mains plug.
 Turn on the appliance.
Emptying the dirt container
– The vacuum channel is equipped with a
float.
– When the dirt water reaches the highest
permissible level in the container, the
suction power is interrupted.
 Turn off the appliance.
 Empty the container.
Turn off the appliance
 Turn off the appliance.
 Pull out the mains plug.
After each operation
 Empty the container.
 Vacuum and wipe the appliance inside
and outside with a damp cloth.
Storing the Appliance
Illustration
 Store the floor nozzles, suction pipes,
suction hose, elbow, crevice nozzle and
power cord in accordance with the illus-
tration.
 Place the appliance in a dry room and
secure it from unauthorized use.
CAUTION
Risk of injury and damage! Observe the
weight of the appliance when you transport
it.
 In order to transport the appliance over
longer distances, push it on the push
handle.
 When transporting in vehicles, secure
the appliance according to the guide-
lines from slipping and tipping over.
CAUTION
Risk of injury and damage! Note the weight
of the appliance in case of storage.
This appliance must only be stored in inte-
rior rooms.

Care and maintenance

DANGER
First pull out the plug from the mains before
carrying out any tasks on the machine.
Change cartridge filter
 Release and remove the suction head.
 Unscrew the star screw, pull out the
cartridge filter and replace with a new
one.
 Tighten the star screw.
 Insert and lock the suction head.
Cleaning the mechanical overflow
 Release and remove the suction head.
 Unscrew the star screw and pull out the
cartridge filter.
 Clean the mechanical overflow protec-
tion with a moist cloth.
 Replace the cartridge filters.
 Tighten the star screw.
 Insert and lock the suction head.
– 3
EN

Transport

Storage

safeguard
13