Complete The Installation - Kohler K-11830 Mode D'emploi

Orange and Black Battery Wires
Green and Red Solenoid Wires

8. Complete the Installation

NOTE: Avoid the area in front of the sensor for 2 minutes after
connections are complete. The sensor will not function correctly if it
is triggered in the first 2 minutes. Disconnect and reconnect the
power to reset the sensor.
Connect the solenoid wires (green and red).
Connect the Hybrid Energy Cell (HEC) to the power input wires
(black and orange).
Avoid the area in front of the sensor for 2 minutes.
Install the faucet trim following the directions provided.
Turn the water on.
Test the faucet.
Check for leaks.
1124216-2-B 12 Kohler Co.