Disconnecting A Bluetooth Connection - Yamaha R-N803 Mode D'emploi

Masquer les pouces Voir aussi pour R-N803:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

2
Operate the Bluetooth device to establish a
Bluetooth connection.
Select the unit's model name from the Bluetooth
device list on your device.
When a connection is established, Bluetooth indicator
on the front display will be light up.
Note
If you cannot connect the Bluetooth device, please perform
pairing again.
3
Operate the Bluetooth device to play back
music.
Note
You can use the playback keys on the remote control to control
playback.
Disconnecting a Bluetooth
connection
Follow one of the procedures below to disconnect a
Bluetooth connection.
• Turn off the Bluetooth function on the Bluetooth
device.
• Hold down BLUETOOTH on the remote control for at
least 3 seconds.
• Select an input source other than "Bluetooth" on the
unit.
Playing back music via Bluetooth
Bluetooth
• Bluetooth is a technology for wireless communication
between devices within an area of about 10 meters (33 ft)
employing the 2.4 GHz frequency band, a band which can
be used without a license.
Handling Bluetooth communications
• The 2.4 GHz band used by Bluetooth compatible devices is
a radio band shared by many types of equipment. While
Bluetooth compatible devices use a technology minimizing
the influence of other components using the same radio
band, such influence may reduce the speed or distance of
communications and in some cases interrupt
communications.
• The speed of signal transfer and the distance at which
communication is possible differs according to the distance
between the communicating devices, the presence of
obstacles, radio wave conditions and the type of equipment.
• Yamaha does not guarantee all wireless connections
between this unit and devices compatible with Bluetooth
function.
33
En

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

R-n803d

Table des Matières