Philips HB953 Manuel page 17

C
7 Grab the handle with both hands, put one foot against the
appliance to prevent it from sliding away and tilt the upper part
with the stand backward.
The automatic unlocking system will only work if you tilt the upper
part with the stand backward far enough. However, you should be
careful not to tilt it backward too far because you might lose your
balance if you do.
C
8 Push the upper part down.
C
9 Lower it slowly onto the base.
C
10 Fasten the lamp units to the base by pushing both catches in
the direction of the arrow.
Replacement
The light emitted by the tanning lamps will become less bright in time
(i.e. after a few years in case of normal use).When this happens, you
will notice a decrease in the tanning capacity of the appliance.You can
solve this problem by setting a slightly longer tanning time or by having
the tanning lamps replaced.
Type HB953 only:The remote control of the appliance includes a
counter that registers the number of operating hours.
ENGLISH
17