How To Insert Or Replace The Batteries - Omron MicroAIR U100 Mode D'emploi

How to insert or replace the batteries

Inserting batteries
1. Remove the battery cover on bottom side by pushing on the
release buttons on both sides.
2. Insert the batteries according to the battery polarity indicated
inside the battery compartment.
3. Replace battery cover by pushing buttons on both sides of the
battery cover.
Battery life and battery replacement
The unit can operate with alkaline batteries or with nickel-metal-hydride (NiMH) rechargeable
batteries. Depending on the capacity and condition of the batteries, the unit can operate up to
4 hours on a set of alkaline batteries.
Notes:
12
Battery Low Indicator (orange light)
Flashes The batteries are low. Replace both batteries with new ones.
The batteries are depleted. The device will not nebulize. Immediately
Turns on
replace both batteries with new ones.
• The battery low indicator will turn off if no button is pressed for
10 seconds or if you turn off the device.
• Remove batteries if the unit is not in use for long periods. Failure to do
so could result in damage due to battery leakage.
• Batteries should be treated as chemical waste; disposal should be done
at your retail store or at appropriate collection locations.