Maintenance And Cleaning; Important Warning; Cleaning To Be Carried Out By The User - Lincar Alice 480N Manuel D'instructions

3 MAINTENANCE AND CLEANING

RESERVED TO USER

IMPORTANT WARNING

Every maintenance and cleaning operations must be done when the stove is light off and
•
cold.
The stove's conditions must be checked by our qualify staff.
•

3.1 Cleaning to be carried out by the User

The frequency of the stove cleaning and maintenance is depending from wood quality an
•
quantity. An high degree of humidity, ash, powder or chemicals adds inside the wood
could increase the necessary cleaning and maintenance operations; so we recommend
again to employ a very high quality of wood.
Foyer Cleaning . To obtain the best performance during stove's functioning, EVERY
•
DAY it's necessary to clean the foyer grate, empty it from every residuals, clean all the
holes on the bottom and replace it into its place.
External Cleaning. This operation must be done when the stove is cold.
•
Steel/cast iron parts : use a duster with specific detergent
−
Windows/Ceramic: Use a sponge with specific detergent than dry the parts with a
−
dry duster.
Painted parts : Use a duster and neutral soap than dry the parts with duster.
−
Cleaning Internal Lateral Exhaust gas fumes
Mod. 490LZ – 490N :
At least one per year or every time it's necessary
•
The inside cleaning must be done always when the stove is
•
cold. All the necessary equipment should be prepared before
operations.
The cleaning of lateral exhaust gas fumes should be done
•
removing the flame conveyor then employing the hook poker
clean the internal parts ( as in the picture)
When the cleaning operations are finished, reassemble the
•
stove parts.
IT IT IT IT- - - - GB GB- - - - FR FR- - - - ES ES mod. 470-480LZ-490LZ-480N-490N
GB GB FR FR ES ES
30/64