Tools And Materials; Before You Begin - Kohler K-99695 Mode D'emploi

Tools and Materials

Before You Begin

IMPORTANT! To access the controller Web pages for system setup,
the controller and a computer or tablet must be connected to the
same router.
NOTE: Internet access is required for downloading the latest
software for system components.
Read these instructions and determine all components and
installation locations before beginning installation. For shower
configuration options, refer to the guide found on the product
page at www.us.kohler.com.
The controller comes equipped with rubber feet for placement on
a shelf or countertop.
The controller can be mounted vertically or horizontally and is
designed to fit within a 2x4 stud cavity.
If mounting within a stud cavity, an access panel must be
provided for servicing. The cavity must be free of insulation.
A qualified electrician should install a 15 A 120 V GFCI electrical
outlet, within the stud framing, in close proximity to the
controller.
If possible, install the electrical outlet prior to installing the
controller.
An Ethernet cable is provided to connect the controller to a
router. If the router is not within 25' (7.6 m) of the controller,
obtain a longer Ethernet cable or add an extension cable.
This product complies with UL, CSA, FCC, and IC.
1218131-2-A
Computer or Tablet
Plus:
• Router
• Internet Service
• 1" Hole Saw (Optional)
4 Kohler Co.