Connecting The Dr 57 To Your Car Stereo; Connecting Via Fm-Transmitter; Connecting Via Fm-Transmitter (Auto Mode) - Albrecht Audio DR 57 Manuel

5. Tuck the cable behind the A-Frame and run it to the main unit
DR 57
6. The antenna should be mounted vertically, not horizontally
7. Do not attach the DAB antenna over heating wires, in a place
that obstructs the driver's view, or in a place that can experi-
ences interference from metal.
8. Check for metallic heat coating (sun filter) on your car's front
window if you are having issues with DAB connectivity. The heat
coating or sun filter may have negative impact to the reception
performance.
9. The antenna can also be mounted to the rear side windows.

4. Connecting the DR 57 to your Car Stereo

4.1. Connecting via FM-Transmitter

You can choose to set the FM transmitting frequency automati-
cally or manually.

4.1.1. Connecting via FM-Transmitter (Auto Mode):

• Press and hold the MENU button to enter the menu mode,
rotate the navigation knob to search for Audio Out choose
FM Transmitter and confirm by pressing the navigation
knob. Note: This is the default configuration, so this step
can be skipped upon first use.
Press TX button to show the TX Frequency: xxx.xMHz at
•
the footer and then press and hold TX for 3 seconds to acti-
vate the automatic scanning of a "vacant" FM transmission
frequency without interference from other channels. The
scanning process will take 20-30 seconds. The display is
showing "---.-MHZ" and stops at a vacant frequency.
• After a " vacant" frequency is found, press the navigation
knob again to confirm the setting or it will automatically con-
firm after 3 seconds. The selected "vacant" frequency will
30