Software Updates; Extra Features - iKEY-AUDIO RM3 Manuel D'instructions

Once the cable is connected to both the unit and the computer, turn on the
RM3. Wait for the card to be recognized by your computer.
Mac: When an icon appears on your computer, click on it to view the
contents of the card.
PC: Click on the USB device that appears in the My Computer folder.
To copy audio files from the computer to the iKEY RM3, select the files to be
copied and drag them to the icon that appears when the RM3 is connected.
The files associated with the last recording session will be stored as a playlist
entitled lastrec.m3u. They can be opened on the computer simply by clicking
on the playlist icon, or transferred by dragging the playlist icon to the com-
puter.
To copy audio files from the computer to the iKEY RM3, select the files to be
copied and drag them to the icon that appears when the RM3 is connected.
Safe Removal of Device
Always be sure to properly disconnect your device from your computer by
following the steps below for your operating system.
Mac: Select the iKEY RM3 icon. Drag-and-drop it into the trash.
Windows: Click the 'safely remove hardware' icon in the task bar.
Choose the iKEY RM3 as the device to remove.

Extra Features

(TIME Display) The TIME (17) button lets you select what mode the track time
is displayed as in both play mode and record mode. In either mode, pressing
the TIME button will alternate the track time function between Elapsed and
time Remaining.
Connections and System Control
11
Conexiones y Control de sistema • Connexions & Utilisation • Anschlüsse und Systemeinstellungen
*Note: When playing or recording a track over one hour, the time indicator
switches from m:s (minutes seconds) to h:m (hours minutes).
Elapsed represents how much time has gone by in a track, and Remaining
represents the amount of time remaining.
*Note: In record mode, Remaining represents how much recording time is
left on the memory device.
(VOLUME) Use the VOLUME (11) along with the controls on your instrument
to adjust Output level.
(HOLD Mode) The unit is equipped with a HOLD function which freezes all
buttons and the jog wheel from taking action when depressed. To enter this
mode, press and hold the TIME (17) and FORMAT/STEREO-MONO (18) but-
tons simultaneously. The top right of the screen will indicate when the unit is
in hold mode.
To exit HOLD mode, press the TIME and FORMAT buttons simultaneously
again.

Software Updates

Improvements are always being made to our products to increase usabil-
ity and functionality. Occasionally, software updates come out for our iKEY-
AUDIO Series units. Be sure to check the iKEY-AUDIO Web site (http://www.
ikey-audio.com) regularly for updates.
To find out what software version you have on your unit, turn it on and as it
powers up there will be a number that appears at the top of the LCD screen
(10). This refers to the software version. If the Web site has a software update
listed whose number is higher than the one on your unit, than this means the
software on the site is more current and should be loaded onto your unit.