Télécharger Imprimer la page

Extra Features; Software Updates - iKEY-AUDIO HDR7 Manuel D'instructions

Publicité

Les langues disponibles

Les langues disponibles

PC: Click the 'safely remove hardware' icon
in the task bar. Choose the iKEY HDR7 as
the device to remove.

Extra Features

(OUTPUT LEVEL) Use the OUTPUT LEVEL (15)
along with the controls on your instrument to
adjust headphone level.
(MIC GAIN) The MIC GAIN (16) feature is used
to raise or lower an incoming signal by switch-
ing between the LOW and HIGH settings.
(STAND Mount) The Stand mount (19) is where
you connect your unit to a stand (Stand in-
cluded).
(HOLD MODE) To engage the unit into hold
mode, press and hold the LOOP and ENTER
buttons. To turn off hold mode, press and hold
the LOOP and ENTER buttons.

Software Updates

Improvements are always being made to our
products to increase usability and functional-
ity. Occasionally, software updates come out
for our iKEY-AUDIO Series units. Be sure to
check the iKEY-AUDIO Web site (http://www.
ikey-audio.com) regularly for updates.
To find out what software version you have on
your unit, turn it on and as it powers up there
will be a number that appears at the top of the
LCD screen (6). This refers to the software ver-
sion. If the Web site has a software update
Conexiones y Control de sistema • Connexions & Utilisation • Anschlüsse und Systemeinstellungen
listed whose number is higher than the one on
your unit, than this means the software on the
site is more current and should be loaded onto
your unit (*Note- Be sure to load only the soft-
ware listed for your unit specifically).
There are detailed instructions on how to update
your units software located on the iKEY-AUDIO
Web site, however here is a quick guide:
1) Ensure that the software update located
online is most up to date version, and that it
is not currently running on your unit.
2) Unzip and download the latest software
version onto the root directory of your SD
card.
3) Load it onto your unit making sure it is
first powered off and then turn it on.
4) The software will update automatically.
Connections and System Control
22

Publicité

Chapitres

loading