Fujitsu Ten ECLIPSE CD5000 Manuel D'utilisation page 66

Various Settings
Multi-harmonizer settings (Harmonizer)
This function uses harmonic synthesis to restore the high-frequency component that is lost as a result of the
compression process so that better sound can be obtained during MP3 /WMA or Memory Stick (ATRAC3)
playback.
1
Turn the [SEL] button.
2
Press the [SEL] button.
Non-Fader phase selection (Non-F Phase)
The merging of sound between the front and rear speakers and the woofer can be improved by selecting the
phase. Switch to a phase which lets the speakers combine without any disharmony.
1
Turn the [SEL] button.
2
Press the [SEL] button.
Non-Fader Output
Non-Fader Output can be stereo or mono. Select the method that matches the output method for the sub-
woofer system that is connected to the main unit.
1
Turn the [SEL] button to select Stereo or Monaural.
2
Press the [SEL] button.
Importing Sound Data
Sound data adjusted by the web site can be downloaded to a CD-R or a Memory Stick and imported into the
main unit.
1
Turn the [SEL] switch to select media types.
2
Press the [SEL] button.
3
Insert a CD-R or a Memory Stick.
4
Turn the [SEL] button to select the file.
5
Press the [SEL] button.
66
Hi : High effectiveness
Low : Low effectiveness
➔ ➔
... OFF Hi Low
➔
OFF ...
NORMAL: Normal phase
REVERSE: Reverse phase
➔
Disc Memory Stick