Switching Map; Re-Scrolling Through Text Information; Changing Area Shot Screens - Fujitsu Ten ECLIPSE CD5000 Manuel D'utilisation

Switching map

After having passed
described in the guidance, it is necessary to
switch to the next guidance screen manually.
The previous screen can also be accessed
manually and confirmed.
The system can be set to switch the map
automatically when an optional GPS unit
(GPS105) is connected. (For details, refer to
"Automatic Map-switching" on page 48.)
Press [ ] and [
1
between guidance points.
[ ] button :
Switches to the next guidance point.
[ ] button :
Switches to the previous guidance
point.
By each press of the button, the
guidance display changes as follows:
Start point
[ ]
Intersections, etc.
Route between two
intersections (with the GPS
unit connected)
[ ]
Destination
How to operate the AREA SHOT function (U.S.A. and CANADA only)
by each location
] to switch
[ ]
[ ]
Re-scrolling through text
information
Text information including intersection street
names and turn directions can be scrolled
across the screen. A maximum of
characters can be displayed on a single
screen. Excess characters are scrolled on the
display. When scrolling is complete, the first
nine characters are once more displayed on
the screen. To re-scroll perform the following
operation:
1
Press the [DISP] button.
Guidance information can be re-
scrolled.

Changing AREA SHOT screens

In the AREA SHOT mode, the audio screen
can be accessed.
Press the [RTN] button for less
1
than one second.
Pressing the button repeatedly allows
you to switch back and forth between
the AREA SHOT screen and the Audio
screen.
9
IX
47