Grounding Instructions - Tennant ORBIO OS 3 Manuel De L'opérateur

4. When using MultiSurface Cleaner:
− Do not mix with other cleaning
products.
− Do not drink.
− Refer to SDS (Safety Data Sheet) for
additional safety information and
precautions.
− Wear personal protection safety
equipment as needed.
5. When using MultiMicro 200 Solution:
− Do not mix this product with ammonia
or acid, which will produce chlorine
gas.
− Do not mix with other cleaning
products.
− Do not drink.
− Refer to SDS (Safety Data Sheet) for
additional safety information and
precautions.
− Wear personal protection safety
equipment as needed.
For Safety: wear protective gloves.
For Safety: wear eye protection.

GROUNDING INSTRUCTIONS

Equipment must be grounded. If it should
malfunction or break down, grounding
provides a path of least resistance for
electrical current to reduce the risk of
electrical shock. This equipment is equipped
with a cord having an equipment−grounding
conductor and grounding plug. The plug
must be plugged into a Ground Fault Circuit
Interrupter (GFCI)−protected outlet or adapter
that is properly installed in accordance with
all local codes and ordinances. Do not remove
ground pin; if missing, replace plug before
use.
Grounded 3
Grounded Outlet
Hole Outlet
Grounding
Edge/hole
Ground Pin
120V
OS3 DM20036 (1−2018)
220V/230V/240V
OPERATION EN
3