Antimicrobial Solution; (Bottom Positions Indicated In Yellow); Operating The Orbio Dispenser; Filling Bottles - Tennant ORBIO OS 3 Manuel De L'opérateur

Masquer les pouces Voir aussi pour ORBIO OS 3:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

EN OPERATION

ANTIMICROBIAL SOLUTION

(bottom positions indicated in yellow)

Multi
Multi
Micro
MultiMicro is the antimicrobial solution generated
by the os3. The os3 dilutes this solution and
dispenses MultiMicro 200, the ready to use form
containing 200 ppm available chlorine. MultiMicro
200 is an effective disinfecting and sanitizing
solution. Do not dilute MultiMicro 200 with water.
The solution is ready to use after being dispensed
from the Orbio dispenser.
MultiMicro 200 stored in a spray bottle or sealed
container is effective for up to 7 days. Discard
expired solution.
MultiMicro Concentrate has a stability of 30 days.
To ensure proper concentration levels, the
MultiMicro tank must be evacuated at least every
30 days. Evacuate the MultiMicro Concentrate
using the MultiMicro 200 bucket fill position. Drain
until the Wait to Dispense indicator displays.
Dispose the solution according to local waste and
disposal regulations.
FOR SAFETY: Do not mix MultiMicro 200 with
ammonia or acid which will produce chlorine
gas. Do not mix with other cleaning products.
Refer to the SDS (Safety Data Sheet) for
additional safety information and precautions.
NOTE: For application information and
antimicrobial claims, refer to the use directions
detailed on the os3 generator label.
8
CLEANER
200

OPERATING THE ORBIO DISPENSER

The Orbio os3 and satellite systems are equipped
with a four position dispenser.
FOR SAFETY: Do not operate machine unless
operator's manual is read and understood. Do
not drink. Refer to SDS (Safety Data Sheet) for
additional safety information and precautions.

FILLING BOTTLES

1. Turn selector knob to the bottle fill position for
MultiMicro 200 or MultiSurface Cleaner.
2. Insert bottle fill nozzle into the spray bottle.
3. Push the dispenser button to fill the bottle.
Multi CLEANER
Multi 2 00
Micro
NOTE: Only use clean bottles properly labeled
with labels provided with this machine. Do not use
non−labeled or mis−labeled bottles.
Refer to the MultiMicro 200 and MultiSurface
Cleaner bottle labels for instructions for use.
Multi
CLEANER
Multi
Micro
200
Multi
CLEANER
Multi
Micro
200
OS3 DM20036 (3−2014)

Publicité

Table des Matières
loading

Table des Matières