Cutting Attachment - ESAB W-300 Manuel D'instructions

SECTION 2
PUROX CW-300
®

Cutting Attachment

Cutting Range using acetylene ........ . . . . . . . . . . . . . . . . . . . . .1/16 to 8 in.
Cutting Range using
other fuel gases . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1/16 to 4 in.
Cutting Nozzles (CW-300) ............... 4200 series
CW-300 Cutting Attachment
(90 deg. Head) - P/N 999340
(75 deg. Head) - P/N 999341
(180 deg. Head) - P/N 18544
Ease-on control of cutting oxygen for smoother starts
■
Adapts torch to oxy-fuel cutting
■
Unique piston-type "O" ring seals provide positive,
■
leak-proof connections
Also effective for pad washing, gouging and rivet washing
■
Operates with all medium pressure acetylene and other fuel
■
gases
Valve packing nut contained under handwheel to resist stem
■
damage
W-300 Standard Acetylene Single
Flame Welding Heads
PUROX
Welding Range .......................................................... Thin gauge to over 1 in.
Heating Range ...............................................................1 to 200 cfh acetylene
Equivalent to approximately 1400 to 300,000 Btu/hr.
Acetylene and other fuel gases may be used.
■
■
Operates on medium pressure acetylene and other fuel
■
Gas-mixer – high resistance to backfires, flame pops and
■
■
■
W-300 Standard Multiflame Heating
Heads
7
W-300 Torch
®
W-300 Welding Torch
P/N 999339
Ideal for all welding, brazing or medium heating applica-
tions in average production, repair or
maintenance work
Recommended for manual operations requiring speed and
uninterrupted welding, heating and brazing
gases
flashbacks
Roll stamped permanent identification
Extra length Teflon valve packing for improved backlash
characteristics
W-300 Rosebud Style Multiflame
Heating Heads
DESCRIPTION