Bosch BBS61 Notice D'utilisation page 34

en Basic operation
Charging using the charging cable
Note: The charging cable
vacuum cleaner heat up while char-
ging. This is normal and harmless.
Requirement: The battery has been
inserted.
→ "Inserting and charging the bat-
tery", Page 33
Place the vacuum cleaner close to
1.
the socket.
Plug the appliance plug into the
2.
vacuum cleaner.
→ Fig.
6
Insert the mains plug into the
3.
socket.
a The status display slowly flashes
white while the battery is charging.
Once the battery is fully charged,
the status display lights up white
for a few minutes.
Tip: To check that the battery has
charged fully, briefly disconnect the
vacuum cleaner from the mains. The
status display then lights up white.
You can charge the vacuum cleaner
whenever it is not in use.
Battery charging times
You can find an overview of the bat-
tery charging times here.
1
Depending on the appliance specifications
34
1
1
and the
a The status display flashes white
Charging in the base station
WARNING
Risk of injury!
An appliance that falls may endanger
people.
Ensure that children do not play
▶
with the appliance, even when it is
in the base station
Note: The charging cable
vacuum cleaner heat up while char-
ging. This is normal and harmless.
Requirement: The battery has been
inserted.
Insert the vacuum cleaner into the
▶
1
base station
→ Fig.
7
while the battery is charging. Once
the battery is fully charged, the
status display lights up white for a
few minutes.
Tip: To check that the battery has
charged fully, briefly disconnect the
vacuum cleaner from the mains.
Once the status display lights up
white, the appliance is fully charged.
Charging using the quick charger
Press the release button and re-
1.
move the battery to the rear.
→ Fig.
8
Observe the enclosed instructions.
2.
Notes
¡ The specified charging times may
vary depending on the battery
charging status, the battery tem-
perature and the age of the bat-
tery.
1
1
.
1
and the
from the front.
1