NOVARDEN NSH35s Manuel D'installation Et D'utilisation page 5

Safety instructions and precautions
• If you notice any abnormal conditions, such as a noise, smoke,
odour or an electrical leakage, immediately switch the appliance
off and contact your professional fitter.
• Do not use or store fuel or liquid gas such as thinners/solvents,
paint or petrol close to the appliance because it is a fire risk.
• To optimise the heating efficiency, insulate the hydraulic
connections between the swimming pool and the heat pump.
Use a suitable cover over your swimming pool.
• The hydraulic circuit between the swimming pool and the
appliance must be ≤10m otherwise heating efficiency may be
reduced.
• This appliance can reach a high efficiency level with an air
temperature between +10°C and +43°C.
• Avoid too high temperatures which would cause overheating or
too low, which would make water too cold.
• The appliance's main power switch must be out of children's
reach.
• If you experience a loss of power, the heat pump will automatically
reactivate once power is restored.
• Switch the appliance off during a power cut and reset the
temperature once the power is restored.
• In the event of a thunderstorm, switch off the main power switch
to avoid lightening damage.
• This appliance is not intended to be used by children or any person
with reduced physical, sensory or mental capacities, unless they
have been given supervision or instruction concerning use of the
device from a person responsible for their safety.
• If the appliance is not used for a long period of time, consider
unplugging it and draining it completely by opening the valve on
the inlet pipe.
3
EN