Location And Dimensions; Securing The Frame - NOVARDEN NSH35s Manuel D'installation Et D'utilisation

Heat pump installation

Location and dimensions

The heat pump must be installed in a well-ventilated area on a firm,
flat surface. The appliance must always be kept upright, in a vertical
position.
To ensure heating efficiency, the water pipe between the swimming
pool and the heat pump must be between 2m and 10m.
You must leave a space of at least 50cm between the heat pump and
any obstacle (wall, bush, etc.).

Securing the frame

The appliance's frame must be secured with nuts (M10) to a concrete
base or with brackets. The concrete base must be solid and stable
and the brackets must be protected against rusting.
9
EN